User's Manual

4 Setting

This chapter introduces how to configure and view the radar information, including settings about

radar, network, event, storage, and system.

Radar 4.1

You can make configurations about radar such as setting video and snapshot parameters, adding

PTZ cameras, doing radar and camera linkage, managing protection zone, and setting IVS.

4.1.1 Video

You can set video stream, snapshots, overlay, and storage path.

4.1.1.1 Video Stream

You can set the main stream and sub stream of live videos.

Select Setting > Radar Settings > Video > Video. Step 1

The Video interface is displayed. See Figure 4-1.

Set video stream Figure 4-1

 Video stream configuration interface might vary with different devices, and the

actual interface shall prevail.

 Default values might vary with different video streams, and the actual interface shall

prevail.

Configure parameters as needed. For details, see Table 4-1.Step 2