Users Manual Part 1


50
Figure 2-67 Rear panel

The Advanced 1U 8PoE AI NVR series rear panel is shown as below.
Figure 2-68 Rear panel

The General 1U 16PoE AI NVR series rear panel is shown as below.
Figure 2-69 Rear panel

Table 2-38 Rear panel description
No.
Port Name
Function
1
Power input port
Input power of 100
-240 V and 50-60 Hz.
2
Power button
Turns on/off the NVR.
3
PoE port
Built
-in switch. It can provide power for IPC.
16 PoE ports: 1
-8 are ePoE ports (support 300m @ 100M.
800m @ 10M). 9
-16 are regular PoE ports. The device
supports 150 W total power.
8 PoE ports: 1
-8 are ePoE ports (support 300m @ 100M.
800m @ 10M). The device supports 48 V, 120 W total power.
4
Alarm input/output of
Advanced 1U 16PoE
AI NV
R and
Advanced 1U 8PoE AI
NVR
Alarm input
port (1
-4)
●
They receive signals from external
alarm source. Alarm input includes two
types; NO (normal open) and NC
(normal close).
●
When your alarm input device is using
external power, make sure the device
and the NVR have the same GND.