Users Manual Part 1

48
2.2.24 Advanced 1.5U 16PoE AI NVR/General 1.5U 16PoE AI
NVR/General 1.5U AI NVR Series
The following figure takes Advanced 32-channel 1.5U 16PoE AI NVR series as examples.
The figure is for reference only.
Figure 2-66 Rear panel
No.
Port Name
Function
1
Power button
Turns on/off the NVR.
2
PoE port
Built
-in switch. It can provide power for IPC.
16 PoE ports: 1-
8 are ePoE ports (support 300m @ 100M.
800m @ 10M). 9-16 are regular PoE ports.
Device with 16 PoEs supports 150 W total power.
3
eSATA port
External SATA port. It can connect device with SATA port.
You need to jump the HDD when there is p
eripherally
connected HDD.
4
HDMI port
High definition audio and video signal output port. It
transmits uncompressed high definition video and
multiple
-
channel audio data to displays with HDMI port. The
two HDMI ports support 2
-channel high definition HDMI
output of different sources.
5
VGA port
VGA video output port. Output analog video signal. It can
connect to the monitor to view analog video.
6
RS
-232 port
It is for general COM debugging to configure IP address and
transfer transparent COM data.
7
Alarm input port (1
-
16)
There are four groups: 1-4, 5-8, 9-12 and 13-16.
They receive signals from external alarm source. Alarm
input includes two types; NO (normal open) and NC
(normal close).
When your alarm input device is using external power,
make sure the device and the NVR have the same GND.