Users Manual Part 1


27
Name
Function
B
port
RS485_B. It is the cable B. You can connect to the
control devices such as speed dome PTZ.
Network port
10/100/1000 Mbps self
-adaptive Ethernet port.
Connect to the
network cable.
USB port
USB port. Connect to mouse, USB storage device,
USB burner and more.
RS
-232
RS
-232 debug COM
It is for general COM debug to configure IP address
or transfer transparent COM data.
HDMI
High Definition
Media Interface
High definition audio and video signal output port.
It transmits uncompressed high definition video and
multiple
-channel data to the HDMI port of the
display device. HDMI version is 1.4.
VGA
VGA video output
port
VGA video output port. Output analog video signal.
It can connect to the monitor to view analog video.
PoE PORTS
/
Built
-in Switch. Support PoE.
For PoE series product, you can use this port to
provide power to the network camera.
2.2.7 4K 1.5U (S2)/General 1.5U AI NVR Series
The general 4K 1.5U (S2)/General 1.5U AI NVR series rear panel is shown as below.
Figure 2-47 Rear panel

The 1.5U (S2) with sixteen PoE ports/General 1.5U 16PoE AI NVR series rear panel is shown as below.
Figure 2-48 Rear panel

Table 2-21 Ports
Name
Function
Power switch
—
Power on
-off button
Power input port
—
90~264
-12 VAC 12.5 A/-53 V 2.83 A
MIC IN
Audio input port
Bidirectional talk input port. It is to receive the
analog audio signal output from the devices such as
microphone, pickup.