Users Manual Part 1
181
4. Click to modify similarity.
5. Click to configure alarm linkages.
● Stranger Alarm: The alarm is triggered when the similarity of detected faces does not
reach the defined value.
Figure 5-97 Stranger alarm (AI by recorder)
1. Select Stranger Alarm in AI Mode.
2. Click enable the function.
3. Configure the alarm linkage actions. For details on alarm linkage, see Table 5-42.
Step 5 Click Apply.
5.9.5.4.2 Configuring AI by Camera
Make sure the connected camera supports face recognition.
Step 1 Select Main Menu > AI > Parameters > Face Recognition.
Step 2 Select the channel, enable the function, and select AI by Camera in the Type list.