Users Manual Part 1


173
Figure 5-88 Face and body detection

Step 2 Select a channel, and then click to enable the function.
Step 3 Enable Face & Body Image Enhancement to improve detection efficiency.
Step 4 Configure target filters.
You can configure two target filters (maximum size and minimum size). The system triggers
an alarm when the size of detected target is between the maximum size and the minimum
size.
Step 5 Click Setting next to Schedule to configure the arming period.
The system triggers corresponding alarm actions only during the arming period.
● On the time line, drag to set the period.
● You can also click to set the period.
Step 6 Configure alarm linkage actions. For details, see Table 5-42.
Step 7 Click Apply.
5.9.4.3 AI Search (Face & Body Detection)
To search for face detection results, see "5.9.3.3 AI Search (Face Detection)". To search for body
detection results, see "5.9.8.3.1 Human Detection".
5.9.5 Face Recognition
The system compares the detected faces with the faces in the database to judge whether the
detected face belongs to the database. When the similarity reaches the defined threshold, an alarm is
triggered.
5.9.5.1 Enabling Smart Plan
To use AI by camera, you need to enable the smart plan first. For details, see "5.9.2 Smart Plan".