Users Manual Part 1


162
Icon
Function
Display and hide POS information.
In 1
-
channel playback mode, you can click it to display/hide POS information on
the video.
In 1
-channel playback mode, click it to enable or disable display IVS rule
information on the video.
This function is for some series only.
Picture search.
5.8.2.3 Smart Search Playback
This function is for some models only.
During the playback process, the system can analyze the motion detection zone in the scene and give
the analysis result.
Make sure that motion detection has been enabled in Main Menu > ALARM > Video Detection >
Motion Detection.
Step 1 Select a channel to playback video and then click . You can view the grids on the
playback video.
● This function is for one-channel playback mode.
● In multiple-channel playback mode, double-click a channel to switch to one-channel
playback mode.
Step 2 Select smart search zones (22*18(PAL), 22*15(NTSC)).
Step 3 Click to go to smart search and playback. The system is going to play back all motion
detection record footage.
Step 4 Click again to stop smart search.
● The motion detection region cannot be the full screen zone.
● The motion detection region adopts the current whole play pane by default.
● The time bar unit switch, rewinding, frame by frame are not available when the system
is playing a motion detection file.
5.8.2.4 Clipping Videos
You can clip some footage from recorded videos to a new file and then save to the USB device.
Step 1 Select a record first and then click to play back.
Step 2 Select a time on the time bar and then click to start clip.
Step 3 Select a time on the time bar and then click to stop clip.
Step 4 Click , the system pops up dialogue box to save the clip file.