Users Manual Part 1


152
Figure 5-65 Video schedule

Step 2 Configure the parameters.
Table 5-21 Video schedule parameters
Parameter
Description
Channel
Select a channel to record a video.
Pre
-record
Enter the amount of time that you want the pre
-recording to last. A
recording will be made prior to the event.
Redundancy
If there are several HDDs installed to the Device, you can set one of the
HDDs as the redundant HDD to save the recorded files into different
HDDs. If one of the HDDs becomes damaged, you can find the backup
on the other HDD.
●
Select Main Menu > STORAGE > Disk Manager, and then set a
HDD as redundant HDD.
●
Select Main Menu > STORAGE > Schedule > Record, and then
select the Redundancy checkbox.
ƺ
If the selected channel is not recording, the redundancy
function will take effect the next time that you record, whether
or not you select the checkbox.
ƺ
If the selected channel is recording, the current recorded files
will be packed, and then start recording according to the new
schedule.
●
This function is for some models only.
●
The redundant HDD only backs up the recorded videos but not
snapshots.