Users Manual Part 1


116
Parameter
Description
Address
Enter the address for PTZ camera. The
default is 1.
The entered address must be the same with the address configured on the
PTZ camera; otherwise the system cannot control PTZ camera.
Baud rate
Select the baud rate for the PTZ camera. The default is 9600.
Data Bit
The default value is 8.
Stop Bit
The default value is 1.
Parity
The default value is
None.
Step 3 Click Apply.
5.6.7.2 PTZ Control
You can use the PTZ control panel to perform the operations such as directing camera in eight
directions, adjusting zoom, focus and iris settings, and quick positioning.
Basic PTZ Control Panel
Right-click the live page, and then select PTZ Control.
Figure 5-30 Basic PTZ control panel

● The gray button means system does not support current function.
● For some model, the PTZ function is available only in one-window mode.
Table 5-11 PTZ control parameters
Parameter
Description
Speed
Controls the movement speed. The bigger the value, the faster the
movement.
Zoom
: Zoom out.
: Zoom in.
Focus
: Focus far.
: Focus near.
Iris
: Image darker.
: Image brighter.
PTZ movement
Supports eight directions.