Quick Start Guide
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Introduction
- 2 Start and Shutdown
- 3 Quick Configuration
- 4 System Configurations
- 4.1 Preview
- 4.2 Playback
- 4.3 TV Wall
- 4.4 Platform
- 4.5 PTZ Control
- 4.6 Settings
- 4.7 Extension
- Appendix 1 Cybersecurity Recommendations
System Configurations 26
Patrol Config Figure 4-10
Click . Step 2
The Scheme Config interface is displayed. See Figure 4-11.
Scheme Config
Figure 4-11
Select the scheme, and click OK. Step 3
Scheme can only be added one by one.
If less than 2 schemes are added, patrol is not available.
Click Return to configure Patrol Time. Step 4
Relevant Operation
On the Preview interface, click to enable patrol. See Figure 4-12.