Quick Start Guide
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Introduction
- 2 Start and Shutdown
- 3 Quick Configuration
- 4 System Configurations
- 4.1 Preview
- 4.2 Playback
- 4.3 TV Wall
- 4.4 Platform
- 4.5 PTZ Control
- 4.6 Settings
- 4.7 Extension
- Appendix 1 Cybersecurity Recommendations
Quick Configuration 11
Parameter
Description
IP version
Keep the default value.
Ethernet card
Select Ethernet card.
IP address
Enter numbers to modify IP address, set corresponding Subnet Mask and
Gateway. Default IP address of network keyboard is 192.168.1.108.
Subnet mask
Gateway
Preferred DNS
IP address of DNS server.
Alternate DNS
IP address of alternate DNS server.
Click Save. Step 3
3.5.2 Wi-Fi
On the General interface, click the Wi-Fi tab to enter the interface.
Automatic Search for Wi-Fi
Click to enable Wi-Fi function.
The system will search Wi-Fi automatically and display results. See Figure 3-4. Click to
refresh.
Automatic search for Wi-Fi Figure 3-4
Wi-Fi Connection
Double-click Wi-Fi name or signal strength. Step 1
The Wi-Fi Connection dialog box pops out. See Figure 3-5.