User's Manual
Table Of Contents
- Regulatory Information
- Cybersecurity Recommendations
- Foreword
- Important Safeguards and Warnings
- 1 Product Introduction
- 2 Dimension and Installation
- 3 Boot up the Device
- 4 Local Configurations
- 4.1 Initializing Device
- 4.2 Logging into the Device
- 4.3 Quick Configuration
- 4.4 Common Operations
- 4.5 Alarm Configuration
- 4.5.1 Alarm
- 4.5.2 Configuring Video Detection Settings
- 4.5.3 Configuring Alarm Events Settings
- 4.5.4 Abnormality
- 4.5.5 Configuring Alarm Output Settings
- 4.5.6 Searching Alarm Log
- 4.6 System config
- 4.7 System Update
- 4.8 System Maintenance
- 5 Web Operations
- 5.1 Initializing Device
- 5.2 Logging into the Device
- 5.3 Quick configuring
- 5.4 Common operations
- 5.5 System Settings
- 5.6 System Update
- 5.7 System Maintenance
- 6 Operating by DSS
- 7 FAQ
- Appendix 1 Mouse Operations
- Appendix 2 HDD Capacity Calculation
- Appendix 3 Technical parameters
81
Name
Description
AUTH
Includes PAP, CHAP, and NO_AUTH protocols. The system automatically
recognizes and displays the enabled protocol
Dial Number Enter the dial number provided from the Communication Operator
Username
This parameter needs to be set up when the authentication mode is PAP
or CHAP
The system automatically recognizes the username and password
Password
Click Apply.
After access is succeeded, the obtained IP address is displayed.
4.6.2.2.2 View Mobile Network Status
Check the mobile network status, including module state, SIM state, dialing state, working
mode, etc.
In the main menu, select NETWORK > 3G > Status. The Status interface is displayed. See
Figure 4-64.
Status
4.6.2.2.3 Review data usage
You can review 3G data usage.
In the main menu, select NETWORK > 3G > 3G Flow. The 3G Flow interface is displayed.
See Figure 4-65.
The system displays data usage for the last 7 days and the total data usage of the month up
to date. The total data is zeroed out and accumulates again after a calendar month ends and
a new one begins.
Click Refresh to obtain the latest updated flow information, which is updated every 5
minutes.
Click Zero Out to clear all information of the current data usage count.