User's Manual
Table Of Contents
- Regulatory Information
- Cybersecurity Recommendations
- Foreword
- Important Safeguards and Warnings
- 1 Product Introduction
- 2 Dimension and Installation
- 3 Boot up the Device
- 4 Local Configurations
- 4.1 Initializing Device
- 4.2 Logging into the Device
- 4.3 Quick Configuration
- 4.4 Common Operations
- 4.5 Alarm Configuration
- 4.5.1 Alarm
- 4.5.2 Configuring Video Detection Settings
- 4.5.3 Configuring Alarm Events Settings
- 4.5.4 Abnormality
- 4.5.5 Configuring Alarm Output Settings
- 4.5.6 Searching Alarm Log
- 4.6 System config
- 4.7 System Update
- 4.8 System Maintenance
- 5 Web Operations
- 5.1 Initializing Device
- 5.2 Logging into the Device
- 5.3 Quick configuring
- 5.4 Common operations
- 5.5 System Settings
- 5.6 System Update
- 5.7 System Maintenance
- 6 Operating by DSS
- 7 FAQ
- Appendix 1 Mouse Operations
- Appendix 2 HDD Capacity Calculation
- Appendix 3 Technical parameters
74
4.6.1.1 Configuring Encode Parameters
4.6.1.1.1 Configuring Video Streaming
You can set up some video stream parameters, including Stream Type, Encode Mode,
Resolution, and more depending on the actual network bandwidth.
In the main menu, select Camera > Encode Setting > Encode.
The Video Stream screen appears. See Figure 4-55.
Video Stream
Select channel, and configure parameters. For details, see Table 4-15.
Table 4-15 Encode setting parameters description
Name
Description
Record Type
The record type is permanently fixed as general and cannot be
changed. For general record, motion detection and alarm,
general stream is configured for recording.
Encode Mode Encode Mode of video
Smart Code
After the smart code is enabled, reduce the bit rate value.
NOTE
Only some models support Smart Code.
After the smart code is modified, restart IPC. Some IPC
functions (such as smart analysis, ROI, SVC, corridor
pattern, and more) will be invalid. Proceed with caution.
Resolution
The higher the video resolution, the better the image quality
Frame Rate (FPS)
Configure the frames per seconds for video. The higher the
value, the smoother and more vivid the image