User's Manual

71
Abnormality
Click each abnormal event bar, and select Event Type.
 Hard Disk: Configure abnormal event alarm detection for hard disk, including No
HDD, HDD Error, HDD No Space.
 User: Configure abnormal event alarm detection for illegal login.
 Device: Configure abnormal event alarm detection for device, including low
battery, temperature too high, rollover, collision, over speed and low speed.
Enable abnormal event alarm detection.
 Abnormal event alarm detection for hard disk and user is enabled by default.
Keep the default.
 For abnormal event alarm detection for device, click to enable
abnormal event alarm detection.
Configure abnormality parameters. For the detailed description, see Table 4-14.
Table 4-14 Abnormal event setting parameters description
Name
Description
Attempt(s)
If Illegal Login is selected, configure this parameter.
In the Attempt(s) box, enter the maximum number of allowed password
input errors If the number of password input errors reaches this value,
the user account will be locked
Lock Time
If Illegal Login is selected, configure this parameter.
Set up the lock time for the locked user account when the number of
password input errors reaches this value
Ceiling
temperature
If
Temperature Too High
is selected, configure this parameter
Enter the upper limit of device temperature. The alarm is triggered when
the device temperature exceeds this value
Less Than If Battery Low Voltage is selected, configure this parameter