User's Manual

55
Linkage Description
Reference
chapters
Alarm Output
When an alarm is triggered, the
system starts recording by linking
the alarm output device. After an
alarm ends, the alarm output
stops after an extended time
period according to the configured
Alarm Delay
.
See4.5.1.3Output for details.
Snapshot
When an alarm is triggered, the
system starts snapshot by linking
the channel.
See4.5.1.4Snapshot for details.
Tour
When an alarm is triggered, a tour
of the selected channels is
displayed on the local interface of
the Device.
See4.5.1.5Tour for details.
Show Message
When an alarm is triggered, alarm
message is displayed on the local
interface.
See4.5.1.6Show for details.
Send Email
When an alarm is triggered, the
system sends an alarm email to a
designated recipient.
See4.5.1.7Sending for details.
Buzzer
When an alarm is triggered, the
alarm buzzer beeps.
See4.5.1.8Buzzer for details.
System log
When an alarm is triggered, alarm
message is recorded in the
system log.
See4.5.1.9Log for details.
Click Save.
4.5.1.2 Linking Recording
After recording is linked, the system starts recording by linking with the record channel when
an alarm is triggered. After an alarm ends, the system stops recording after an extended time
period according to the configured Delay.
4.5.1.2.1 Configuring Recording Schedule
After motion detection on the recording channel or alarm recording plan is enabled, the
recording channel starts alarm linking with video recording.
Select Storage > Schedule > Record under the main menu.
The Record interface is displayed. See Figure 4-34.