User's Manual
Table Of Contents
- Regulatory Information
- Cybersecurity Recommendations
- Foreword
- Important Safeguards and Warnings
- 1 Product Introduction
- 2 Dimension and Installation
- 3 Boot up the Device
- 4 Local Configurations
- 4.1 Initializing Device
- 4.2 Logging into the Device
- 4.3 Quick Configuration
- 4.4 Common Operations
- 4.5 Alarm Configuration
- 4.5.1 Alarm
- 4.5.2 Configuring Video Detection Settings
- 4.5.3 Configuring Alarm Events Settings
- 4.5.4 Abnormality
- 4.5.5 Configuring Alarm Output Settings
- 4.5.6 Searching Alarm Log
- 4.6 System config
- 4.7 System Update
- 4.8 System Maintenance
- 5 Web Operations
- 5.1 Initializing Device
- 5.2 Logging into the Device
- 5.3 Quick configuring
- 5.4 Common operations
- 5.5 System Settings
- 5.6 System Update
- 5.7 System Maintenance
- 6 Operating by DSS
- 7 FAQ
- Appendix 1 Mouse Operations
- Appendix 2 HDD Capacity Calculation
- Appendix 3 Technical parameters
52
List of recorded video files
Select the file that you want to download, and then click Backup.
The progress and remaining time are displayed by a progress bar during backup.
Click OK to complete backup. You can view the backup files on PC.
NOTE
You can view the backup files on PC. The file format is “Channel number_Record
Type_Time.dav.” The format for time is “year/month/date/hour/minute/second.”
Alarm Configuration
4.5.1 Alarm
After the arming and disarming period and the alarm linkage action are configured, the
system will start the corresponding linkage in the arming and disarming period.
Take the configuration of dynamic alarm linkage detection as an example. The alarm linkage
might be different depending on the alarm. The actual interface shall prevail.
In the main menu, select Alarm > Video Detection > Motion Detect.
The Motion detection interface is displayed, see Figure 4-32.