User's Manual
Table Of Contents
- Regulatory Information
- Cybersecurity Recommendations
- Foreword
- Important Safeguards and Warnings
- 1 Product Introduction
- 2 Dimension and Installation
- 3 Boot up the Device
- 4 Local Configurations
- 4.1 Initializing Device
- 4.2 Logging into the Device
- 4.3 Quick Configuration
- 4.4 Common Operations
- 4.5 Alarm Configuration
- 4.5.1 Alarm
- 4.5.2 Configuring Video Detection Settings
- 4.5.3 Configuring Alarm Events Settings
- 4.5.4 Abnormality
- 4.5.5 Configuring Alarm Output Settings
- 4.5.6 Searching Alarm Log
- 4.6 System config
- 4.7 System Update
- 4.8 System Maintenance
- 5 Web Operations
- 5.1 Initializing Device
- 5.2 Logging into the Device
- 5.3 Quick configuring
- 5.4 Common operations
- 5.5 System Settings
- 5.6 System Update
- 5.7 System Maintenance
- 6 Operating by DSS
- 7 FAQ
- Appendix 1 Mouse Operations
- Appendix 2 HDD Capacity Calculation
- Appendix 3 Technical parameters
50
Click .
The system is playing back snapshots according to the configured interval.
4.4.2.3.2 In the search type list, select PIC.
Select where you want to search the snapshots, and enter the interval time.
The search sources include From R/W HDD and redundancy HDD. The redundancy
HDD is supported only when there is a redundancy HDD on the Device. For details
about redundancy HDD operations, see “4.6.4.2Managing Storage Device.”
From R/W HDD: Play back snapshots from local HDD of the Device.
From redundancy HDD: Play back snapshots from redundancy HDD of the
Device if it is supported.
Select the month, year, and channel number that you want to search.
Select a date.
Click .
The snapshots are displayed in list. See Figure 4-29.
File list
Set the start time, and then click , the searched snapshots are displayed.
Double-click the snapshots folder or click .
The system is playing back snapshots according to the configured interval.
4.4.2.4 Recorded files backup
You can back up the recorded video file into the external storage device.