User's Manual

Table Of Contents
33
4.3.4 Configuring Record Settings
When recording and snapshot functions are enabled, the Device can start recording and
snapshot according to the configured recording and snapshot schedule. Recording types
include automatic recording and manual recording. You can select recording type according
to different stream types.
Auto: The recording starts automatically according to the record type and recording time
as configured in the recording schedule.
Manual: Keep general recording for 24 hours for the selected channel.
Manual recording operation requires the user have the permission to access STORAGE
settings.
Right-click Manual > Record on the homepage.
The Record interface is displayed, see Figure 4-12.
Record
Configure TCP/IP parameters. For details, see Table 4-5.
Table 4-5 Record control parameter description
Name
Description
Channel
The channel that connects to the remote device is displayed.
You can select one or several channels or select All
Status
Indicates the recording status of corresponding channels. The
choices include Auto, Manual, Enable, and Stop
: Selected
: Not selected