User's Manual

32
NOTE
The parameters might be different depending on the model you purchased.
Table 4-4 Manual Add Parameter Descriptions
Name
Description
Channel
The channel number of the remotely connected device. You
can only select a channel that has not added remote devices
Manufacturers
Select a manufacturer according to the actual situation.
Parameters might vary by manufacture. Follow specific
parameters on the interface
IP address Enter the IP address of remote device
TCP Port
TCP service port. The default setting is 37777. You can
configure this parameter according to your actual situation
RTSP Port
Enter RTSP Port number of remote device. The default setting
is 554
HTTP Port
Configure this parameter when the encryption function is
disabled.
Enter HTTP Port number of remote device. The default setting
is 80
HTTPS port
Configure this parameter when the encryption function is
enabled.
Enter HTTPs Port number of remote device. The default
setting is 430
Username
Enter the user name and password to login to the remote
device
Password
Remote Channel
Select the channel number that you want to connect
Encryption
This parameter must be configured when you select
Onvif
as
the Manufacturer.
Enable HTTPs or not. Configure HTTPs Port number when
enabled.
Decode buffer
Enter the size of decode buffer. The unit is millisecond and you
can select from 80 through 480
Service type
This must be set up when you select Onvif or Custom as the
Manufacturer
When selecting different manufacturers, the service types are
different. Select the service type based on your needs
3. Click OK.
The device displays in the added device area.
NOTE
 indicates connection is successful; indicates connection
failed.
 To delete the remote device, click ; to modify the information of an
added device, click or double-click the added device.