User's Manual

31
 Directly click Skip if you do not want to set up the network information or correct
network information already exists.
The device initialization begins. After initialization, click OK.
4.3.3.2 Adding a Remote Device
After a remote device is added, you can view video images transferred by the remote device
and modify configuration of the remote device directly on the Device. You can add a remote
device manually or by search. Different models of the Device support different number of
remote devices to be added. Add remote devices as needed.
Right-click Remote Device on the main interface.
The REMOTE interface is displayed.
Adding a remote device.
 Search and Add
1. Click Device Search, the searched devices are displayed.
2. Double-click on an IP address or select the check box of a device, and then
click Add.
The device displays in the added device area.
 Manual Add
1. Click Manual Add.
The Manual Add interface is displayed. See Figure 4-11.
Manual Add
2. Configure TCP/IP parameters. For details, see Table 4-4.