User's Manual
Table Of Contents
- Regulatory Information
- Cybersecurity Recommendations
- Foreword
- Important Safeguards and Warnings
- 1 Product Introduction
- 2 Dimension and Installation
- 3 Boot up the Device
- 4 Local Configurations
- 4.1 Initializing Device
- 4.2 Logging into the Device
- 4.3 Quick Configuration
- 4.4 Common Operations
- 4.5 Alarm Configuration
- 4.5.1 Alarm
- 4.5.2 Configuring Video Detection Settings
- 4.5.3 Configuring Alarm Events Settings
- 4.5.4 Abnormality
- 4.5.5 Configuring Alarm Output Settings
- 4.5.6 Searching Alarm Log
- 4.6 System config
- 4.7 System Update
- 4.8 System Maintenance
- 5 Web Operations
- 5.1 Initializing Device
- 5.2 Logging into the Device
- 5.3 Quick configuring
- 5.4 Common operations
- 5.5 System Settings
- 5.6 System Update
- 5.7 System Maintenance
- 6 Operating by DSS
- 7 FAQ
- Appendix 1 Mouse Operations
- Appendix 2 HDD Capacity Calculation
- Appendix 3 Technical parameters
22
4 Local Configurations
The Device supports access and operation through the local interface. The local interface
supports functions such as real-time preview, recording search, alarm setting, system setting,
PTZ control interface, and monitoring window.
Initializing Device
Plug the device’s power line into a socket.
After the Device is turned on, the initialization interface is displayed. See Figure 4-1.
Device Initialization
Enter the password, confirm the password and the password hint, and then click
Next.
The unlock pattern setting interface is displayed. See Figure 4-2.
NOTE
To security your account, it is recommended to keep the password properly and
change it regularly.
The password hint can help you recall the password.