User's Manual
Table Of Contents
- Regulatory Information
- Cybersecurity Recommendations
- Foreword
- Important Safeguards and Warnings
- 1 Product Introduction
- 2 Dimension and Installation
- 3 Boot up the Device
- 4 Local Configurations
- 4.1 Initializing Device
- 4.2 Logging into the Device
- 4.3 Quick Configuration
- 4.4 Common Operations
- 4.5 Alarm Configuration
- 4.5.1 Alarm
- 4.5.2 Configuring Video Detection Settings
- 4.5.3 Configuring Alarm Events Settings
- 4.5.4 Abnormality
- 4.5.5 Configuring Alarm Output Settings
- 4.5.6 Searching Alarm Log
- 4.6 System config
- 4.7 System Update
- 4.8 System Maintenance
- 5 Web Operations
- 5.1 Initializing Device
- 5.2 Logging into the Device
- 5.3 Quick configuring
- 5.4 Common operations
- 5.5 System Settings
- 5.6 System Update
- 5.7 System Maintenance
- 6 Operating by DSS
- 7 FAQ
- Appendix 1 Mouse Operations
- Appendix 2 HDD Capacity Calculation
- Appendix 3 Technical parameters
21
3 Boot up the Device
CAUTION
Before booting up the Device, check if input voltage matches rated voltage of the Device.
Refer to international standard to offer the power input (power input that is with stable
power value and less interference ) to ensure the Device works stably and prolong its
service life.
In the first power-on, the Device needs connection to the ACC to work as intended.
Rotate the Device key to and rotate the vehicle key to ACC position. The power indicator
is on, and the Device is ready for work.
NOTE
For the first boot up or after restoring to the default factory settings, the initialization interface
is displayed on the screen. Follow on-screen instructions to initialize your Device prior to use.