User's Manual
Table Of Contents
- Regulatory Information
- Cybersecurity Recommendations
- Foreword
- Important Safeguards and Warnings
- 1 Product Introduction
- 2 Dimension and Installation
- 3 Boot up the Device
- 4 Local Configurations
- 4.1 Initializing Device
- 4.2 Logging into the Device
- 4.3 Quick Configuration
- 4.4 Common Operations
- 4.5 Alarm Configuration
- 4.5.1 Alarm
- 4.5.2 Configuring Video Detection Settings
- 4.5.3 Configuring Alarm Events Settings
- 4.5.4 Abnormality
- 4.5.5 Configuring Alarm Output Settings
- 4.5.6 Searching Alarm Log
- 4.6 System config
- 4.7 System Update
- 4.8 System Maintenance
- 5 Web Operations
- 5.1 Initializing Device
- 5.2 Logging into the Device
- 5.3 Quick configuring
- 5.4 Common operations
- 5.5 System Settings
- 5.6 System Update
- 5.7 System Maintenance
- 6 Operating by DSS
- 7 FAQ
- Appendix 1 Mouse Operations
- Appendix 2 HDD Capacity Calculation
- Appendix 3 Technical parameters
207
The HDD is damaged.
19) Q: No 3G dial-up. No dial-up IP,
A: Possible causes:
Check if the SIM card is normal.
Check if the SIM card is not in service.
Check if the 3G antenna is connected as intended.
Check if the 3G signals are strong enough.
Try out with another SIM card.
20) Q: 3G platform is not online.
A: Possible causes:
Check if 3G dial-up is normal.
Check if local active registration is correctly set up.
Check if the sever terminal is correctly set up.
21) Q: Video record is silent.
A: Possible causes:
Check if a normal analog camera is connected. Only HDCVI camera with audio input
supports audio.