User's Manual
Table Of Contents
- Regulatory Information
- Cybersecurity Recommendations
- Foreword
- Important Safeguards and Warnings
- 1 Product Introduction
- 2 Dimension and Installation
- 3 Boot up the Device
- 4 Local Configurations
- 4.1 Initializing Device
- 4.2 Logging into the Device
- 4.3 Quick Configuration
- 4.4 Common Operations
- 4.5 Alarm Configuration
- 4.5.1 Alarm
- 4.5.2 Configuring Video Detection Settings
- 4.5.3 Configuring Alarm Events Settings
- 4.5.4 Abnormality
- 4.5.5 Configuring Alarm Output Settings
- 4.5.6 Searching Alarm Log
- 4.6 System config
- 4.7 System Update
- 4.8 System Maintenance
- 5 Web Operations
- 5.1 Initializing Device
- 5.2 Logging into the Device
- 5.3 Quick configuring
- 5.4 Common operations
- 5.5 System Settings
- 5.6 System Update
- 5.7 System Maintenance
- 6 Operating by DSS
- 7 FAQ
- Appendix 1 Mouse Operations
- Appendix 2 HDD Capacity Calculation
- Appendix 3 Technical parameters
183
Name
Description
User MAC
Enter user MAC address that is allowed to login the Device
Remarks
Enter a description of the user
Authority
Select the authorities to the user of a group.
NOTE
The authorities of the admin account cannot be changed
To manage account easily, when defining the user account authority, it is
recommended to give lower authority to the common user account than
the advanced user account Authority
Click Save.
NOTE
Click to modify user information; click to delete the user.
Change Password
On the User interface, click .
The Modify User interface appears. See Figure 5-74.
Change Password
Select the Modify Password check box, and then enter old password, new password,
and confirm password in the corresponding box.
(Optional) Set up the reserved phone number.