User's Manual
Table Of Contents
- Regulatory Information
- Cybersecurity Recommendations
- Foreword
- Important Safeguards and Warnings
- 1 Product Introduction
- 2 Dimension and Installation
- 3 Boot up the Device
- 4 Local Configurations
- 4.1 Initializing Device
- 4.2 Logging into the Device
- 4.3 Quick Configuration
- 4.4 Common Operations
- 4.5 Alarm Configuration
- 4.5.1 Alarm
- 4.5.2 Configuring Video Detection Settings
- 4.5.3 Configuring Alarm Events Settings
- 4.5.4 Abnormality
- 4.5.5 Configuring Alarm Output Settings
- 4.5.6 Searching Alarm Log
- 4.6 System config
- 4.7 System Update
- 4.8 System Maintenance
- 5 Web Operations
- 5.1 Initializing Device
- 5.2 Logging into the Device
- 5.3 Quick configuring
- 5.4 Common operations
- 5.5 System Settings
- 5.6 System Update
- 5.7 System Maintenance
- 6 Operating by DSS
- 7 FAQ
- Appendix 1 Mouse Operations
- Appendix 2 HDD Capacity Calculation
- Appendix 3 Technical parameters
182
You can set maximum 64 users and 20 groups.
The default group name by "User" and "Admin" cannot be deleted.
Select the authorities to the user of a group. However, the authorities of the admin account
cannot be randomly specified.
Every user must belong to only one group. When selecting a group for a user, the authority
that the user can be given should be no higher than the group authority.
Both the username and group support 1–31 characters and can only consist of letter,
number, underline (_), and hyphen (-).
5.5.5.3.1 User Management
You can add, delete, or modify user, and set the authorities for the user of a group.
Add User
Select Setting > System > Account > User.
The system displays the User interface. See Figure 5-72.
User
Click Add User.
The Add User interface is displayed. See Figure 5-73.
Add User
Sets up DBHA parameters. See Table 5-33 for details.
Table 5-30 Parameters description for adding user
Name Description
Username
Enter the user name and password, and conform the password
Password
Confirm Pwd
Reusable
Select the check box, user name can also be used to login the web
Group name
Select a group for the user