User's Manual

165
Name
Description
Interval
This is the interval that the system sends an email for the same type of
alarm event, which means, the system does not send an email upon any
alarm event
The interval ranges from 0 to 3600 seconds. 0 means that there is no
interval
NOTE
This setting helps to avoid the large amount of emails caused by frequent
alarm events
Health Enable
The system sends test mail to check if the connection is successfully set
up
Select the Health Enable check box, and then enter the interval. The
system can send a test email to check the connection after the specified
interval
NOTE
The value ranges from 30 minutes to 1440 minutes
Email Test
Click Email Test to test if emails can be sent out and received as
intended. If the configuration is correct, you would receive test email.
Before testing, click
Save
to save the email settings
Click Save.
5.5.2.4 Configuring FTP Settings
Back up recorded videos and images to the preset FTP (File Transfer Protocol) server for
storage.
Preconditions
Make sure you have purchased or download a FTP server and installed it on your PC.
NOTE
For the created FTP user, you need to set the write permission; otherwise the upload of
recorded videos and snapshots will be failed.
Steps
Select Setup > Network > FTP.
The FTP interface is displayed. See Figure 5-57.