User's Manual
Table Of Contents
- Regulatory Information
- Cybersecurity Recommendations
- Foreword
- Important Safeguards and Warnings
- 1 Product Introduction
- 2 Dimension and Installation
- 3 Boot up the Device
- 4 Local Configurations
- 4.1 Initializing Device
- 4.2 Logging into the Device
- 4.3 Quick Configuration
- 4.4 Common Operations
- 4.5 Alarm Configuration
- 4.5.1 Alarm
- 4.5.2 Configuring Video Detection Settings
- 4.5.3 Configuring Alarm Events Settings
- 4.5.4 Abnormality
- 4.5.5 Configuring Alarm Output Settings
- 4.5.6 Searching Alarm Log
- 4.6 System config
- 4.7 System Update
- 4.8 System Maintenance
- 5 Web Operations
- 5.1 Initializing Device
- 5.2 Logging into the Device
- 5.3 Quick configuring
- 5.4 Common operations
- 5.5 System Settings
- 5.6 System Update
- 5.7 System Maintenance
- 6 Operating by DSS
- 7 FAQ
- Appendix 1 Mouse Operations
- Appendix 2 HDD Capacity Calculation
- Appendix 3 Technical parameters
139
Video monitoring screen
Table 5-8 Video monitoring window parameters description
No. Parameter Description
1–4
Device
information
Displays the IP address, channel number, bit stream, and
stream type (M represents main stream, S represents sub
stream)
5 Area zoom in
Click this icon and then hold down the left mouse button to
select the area you want to enlarge. The area is enlarged.
Click this icon again or right-click on the window to exit
6 Local Record
Click this icon to start recording; click it again to stop recording
NOTE
The recorded files default storage path is C:\RecordDownload.
You can modify this path if needed. For details, see
“5.5.1.2.4
Path
.”
7 Snapshot
Click this icon to start taking snapshot.
NOTE
The snapshots default storage path is C:\PictureDownload.
You can modify this path if needed. For details, see
“5.5.1.2.4Path.”
8 Audio
Turns on/off audio. If audio function is not enabled in the
encode settings, the monitoring does not give sound
9 Close Close the live view in the window.
Bit rate
The system supports switching between main stream and sub stream in real-time monitoring
window. See Figure 5-26. For details about stream settings, see 5.5.1.2Configuring encode
parameters.