User's Manual
Table Of Contents
- Regulatory Information
- Cybersecurity Recommendations
- Foreword
- Important Safeguards and Warnings
- 1 Product Introduction
- 2 Dimension and Installation
- 3 Boot up the Device
- 4 Local Configurations
- 4.1 Initializing Device
- 4.2 Logging into the Device
- 4.3 Quick Configuration
- 4.4 Common Operations
- 4.5 Alarm Configuration
- 4.5.1 Alarm
- 4.5.2 Configuring Video Detection Settings
- 4.5.3 Configuring Alarm Events Settings
- 4.5.4 Abnormality
- 4.5.5 Configuring Alarm Output Settings
- 4.5.6 Searching Alarm Log
- 4.6 System config
- 4.7 System Update
- 4.8 System Maintenance
- 5 Web Operations
- 5.1 Initializing Device
- 5.2 Logging into the Device
- 5.3 Quick configuring
- 5.4 Common operations
- 5.5 System Settings
- 5.6 System Update
- 5.7 System Maintenance
- 6 Operating by DSS
- 7 FAQ
- Appendix 1 Mouse Operations
- Appendix 2 HDD Capacity Calculation
- Appendix 3 Technical parameters
124
Web login interface
Enter Username and Password and click Login.
The PREVIEW interface is displayed. See Figure 5-5.
Clicking Exit can log out.
NOTE
Install the plugin as prompted by the system for initial login.
In the upper left corner, the main stream and substream are differentiated by the
tab.
For admin account, if you forget password, click Forgot Password to find back the
password. For details, see 5.5.5.3.3Reset Password.
Preview interface
Quick configuring
5.3.1 Configure IP address
Connect the Device to the network and make sure the Device can communicate with other
devices in the network diagram.