User's Manual
Table Of Contents
- Regulatory Information
- Cybersecurity Recommendations
- Foreword
- Important Safeguards and Warnings
- 1 Product Introduction
- 2 Dimension and Installation
- 3 Boot up the Device
- 4 Local Configurations
- 4.1 Initializing Device
- 4.2 Logging into the Device
- 4.3 Quick Configuration
- 4.4 Common Operations
- 4.5 Alarm Configuration
- 4.5.1 Alarm
- 4.5.2 Configuring Video Detection Settings
- 4.5.3 Configuring Alarm Events Settings
- 4.5.4 Abnormality
- 4.5.5 Configuring Alarm Output Settings
- 4.5.6 Searching Alarm Log
- 4.6 System config
- 4.7 System Update
- 4.8 System Maintenance
- 5 Web Operations
- 5.1 Initializing Device
- 5.2 Logging into the Device
- 5.3 Quick configuring
- 5.4 Common operations
- 5.5 System Settings
- 5.6 System Update
- 5.7 System Maintenance
- 6 Operating by DSS
- 7 FAQ
- Appendix 1 Mouse Operations
- Appendix 2 HDD Capacity Calculation
- Appendix 3 Technical parameters
120
4.8.8 Network packet capturing
You can back up the network packet to the external storage device. These data can be
provided to the developers or engineers to analyze the network usage status.
Preconditions
Make sure the external storage device such as USB flash disk is connected to the Device.
Steps
Select Main Menu > INFO > NETWORK > NET TEST.
Test NET TEST interface is displayed.
Connect the external storage device to the USB port of the Device, and then click
Refresh.
The system detects the external storage device which displays in the Device Name
list.
Select the packet.
1) Click Browse.
The Browse interface is displayed.
2) Select the packet.
NOTE
Click Refresh to refresh the total space, free space, and device file
list.
When the capacity is insufficient, click to delete the unnecessary
files to release the capacity.
Click New Folder to create a new folder in the external storage
device.
3) Click OK.
Test NET TEST interface is displayed.
Click to start backing up packet.
NOTE
The packet of only one network port can be captured each time.
When the backing up is started, you can exit the NET TEST interface to take
other operations, such as web login and monitoring.
Click to stop backing up.
The packet is stored under the name of "Network card name-time.pcap" in the
selected path. You can also back up the packet by Wireshark (a kind of software) on
PC.
4.8.9 Shutdown
Click Main Menu >SHUTDOWN. The SHUTDOWN interface is displayed. See Figure 4-107.