User's Manual

91
Name
Description
Image Upload
Interval
When the Snap Mode is Regular, the image upload method should be
determined according to the upload interval and snapshot interval.
 If this interval is longer than snapshot interval, the system uploads
the most recent snapshot. For example, if the upload interval is 5
seconds, and snapshot interval is 2 seconds per snapshot, then an
upload command is issued every 5 seconds to upload the following
picture captured.
 If this interval is shorter than snapshot interval, the system uploads
the snapshot per the snapshot interval. For example, if the interval
is 5 seconds, and snapshot interval is 10 seconds per snapshot,
the system uploads the snapshot every 10 seconds
When the Snap Mode is Event, the system uploads captured pictures
according to snapshot interval.
NOTE
You can configure the Interval and Snap Mode. For details, see
“4.6.1.1.2Configuring Snapshot Streaming”.
Channel
Select the channel that you want to apply the FTP settings
Weekday
Select the week day and set the time period that you want to upload the
recorded files. You can set two periods for each week
Select the record type (Alarm, MD, and General) that you want to upload.
After checking the corresponding recording type next to the corresponding
period, the selected recording type will be uploaded during the configured
period
Time Period
Click Test to test if the FTP/SFTP server is successfully configured.
 If successful, the system will pop up a message to indicate successful
connection.
 If failed, the system will pop up a message to indicate failed connection. Check
the network connection or configurations.
Click Apply.
4.6.4.4 Viewing HDD Information
Select Main Menu > STORAGE > HDD. The HDD interface is displayed. The following
operations can be performed in this interface.
 Click the HDD to view the list of video recordings in it, as shown in Figure 4-74.
 Double-click the HDD to view the S.M.A.R.T information of the HDD, as shown in Figure
4-75.