User Manual

2
SN Port Name Indicator Connector Note
5
PIR sensor PIR /
Passive IR motion detect port. It
can detect the IR object movement
(such as human body or other
heating object).
6
Microphone / /
Directly receive audio signal.
(This function is optional. For some
series product only.).
7 Micro SD card Micro SD
Micro SD
card slot
SD card storage.
(This function is optional. For some
series product only.).
8
Reset button Reset /
Restore factory default setup.
When system is running normally,
press the RESET button for at least
5 seconds, system can restore
factory default setup.
9 WPS button WPS
Fast wireless
connection
Press the WPS button of the router
and the device respectively for at
least 2 seconds. Usually the device
can connect to the router within 1
minute.
Please note it is for wireless
series product only and it is for
the wireless router of the WPS
function.
10
Alarm pin / I/O port
Alarm signal input/output
(This function is optional. For some
series product only.).
11 Power port DC12V / Input DC 12V power.
12 Network port LAN
Ethernet port
z Connect to standard Ethernet
cable.
z Support PoE function.
1.2 Dimensions
Please refer to the following figure for dimension information. The unit is mm. See Figure 1-2.