4MP Spotlight Wi-Fi Camera Quick Start Guide ZHEJIANG DAHUA VISION TECHNOLOGY CO., LTD. V1.0.
Quick Start Guide Foreword General This manual introduces the installation and operations of network camera. Read carefully before using the device, and keep the manual safe for future reference. Safety Instructions The following signal words might appear in the manual. Signal Words Meaning Indicates a medium or low potential hazard which, if not avoided, could result in slight or moderate injury.
Quick Start Guide ● All the designs and software are subject to change without prior written notice. Product updates might result in some differences appearing between the actual product and the manual. Please contact customer service for the latest program and supplementary documentation. ● There might be deviations in the description of the technical data, functions and operations, or errors in the print. If there is any doubt or dispute, we reserve the right of final explanation.
Quick Start Guide Important Safeguards and Warnings This section introduces content covering the proper handling of the device, hazard prevention, and prevention of property damage. Read carefully before using the device, comply with the guidelines when using it. Transportation Requirements ● Transport the device under allowed humidity and temperature conditions. ● Pack the device with packaging provided by its manufacturer or packaging of the same quality before transporting it.
Quick Start Guide against lightning. For outdoor scenarios, strictly comply with the lightning protection regulations. ● Ground the function earthing portion of the device to improve its reliability (certain models are not equipped with earthing holes). The device is a class I electrical appliance. Make sure that the power supply of the device is connected to a power socket with protective earthing. ● The dome cover is an optical component.
Quick Start Guide ● Use the accessories suggested by the manufacturer. Installation and maintenance must be performed by qualified professionals. ● Do not directly touch the photosensitive CMOS. Use an air blower to clean the dust or dirt on the lens. When it is necessary to clean the device, slightly wet a soft cloth with alcohol, and gently wipe away the dirt. ● Clean the device body with a soft dry cloth.
Quick Start Guide Table of Contents Foreword ........................................................................................................................................................................................................I Important Safeguards and Warnings ............................................................................................................................................ III 1 Package List ......................................................................
Quick Start Guide 1 Package List Figure 1-1 Packing list 1
Quick Start Guide 2 Application ● Distance: Optimal accuracy for objects within 5 ft to 50 ft (1.5 m to 15 m). ● Angle: Angle the camera around 30°-60° down from the level position. ● Height: Install the camera between 8 ft to16 ft (2.5 m to 5 m) off of the ground.
Quick Start Guide 3 Overview Figure 3-1 Overview Press and hold the reset button for 10 s to reset the camera.
Quick Start Guide 4 Operating with DMSS APP To ensure the best possible wireless performance, make sure that there are no obstacles and electromagnetic interference between the device and the router. Step 1 Add the device. 1) Tap + button on the upper-right corner of the DMSS home page to scan the QR code on the camera. If your DMSS fails to scan the QR code, tap Manually enter SN. 2) Make sure the indicator light on the device flashes green, and then tap Next.
Quick Start Guide Figure 4-2 Connect the device hotspot Step 3 Configure the Wi-Fi. Select your Wi-Fi network from SSID list and then enter the password. Step 4 Configure the device information. 1) Create the device name, and then tap Save. 2) Set the time zone, and then tap Done.
Quick Start Guide 5 Installation ● Risk of electrical shock. ◇ ◇ Always follow code standards when installing wired connection. We strongly suggest that you hire a licensed electrician to install the camera. ● Risk of fire. Do not install the camera near combustible or flammable surfaces. Make sure the mounting surface is strong enough to hold at least three times the weight of the camera. 5.1 Wall Mounting Figure 5-1 Wall mounting diagram 1. Place the mounting template onto the desired location.
Quick Start Guide Figure 5-2 Install the bracket 7. Attach the camera to the mounting bracket using the threaded insert at the rear of the camera. Rotate the camera clockwise until attached, then tighten into place with the adjustable nut. Figure 5-3 The back of wall mounting bracket 8. Adjust the camera to the desired angle. If the camera is not holding in place or difficult to adjust, unplug the camera and slide the bracket up to detach from the mounting plate.
Quick Start Guide 5.2 Ceiling Mounting Figure 5-4 Ceiling mounting diagram 1. Place the mounting template onto the desired location. Ensure an outlet is nearby, and keep in mind the cable lengths. 2. Using a 15/64" (6 mm) drill bit, drill 4 holes over the X symbols on the template. 3. (Optional) Drill 15/64” (6 mm) holes for the anchors. 4. Remove the 4 pre-inserted plugs from the ceiling/table mounting bracket. Figure 5-5 Remove the plugs 5.
Quick Start Guide Figure 5-6 Rotate the camera 7. Place the bracket over the drilled holes. Using a screwdriver and the provided screws, secure the bracket to the surface. 8. Rotate the adjustable ring counter-clockwise to loosen and adjust the camera to the desired position, then tighten to secure. Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Quick Start Guide
