User Manual

3
z Narrow beam radar speed measurement to enhance the accuracy, effectively hide
from the electronic dog (anti-speed radar detector)
Dahua self-developed high performance narrow wave radar can meet the international speed
measurement accuracy. The narrow beam radar is rarely detected by the electric dog. It can
effectively monitor the approaching and departing vehicles.
z
Industry-level component and high reliable socket connector
The hardware circuit design adopts the industry-level components. The system is of low power
consumption, high reliability. The built-in Lithium battery can averagely work as long as 8 hours.
The imported reliable socket connector such as Lemo connector and air-level connector further
guarantees the system reliability.
z High definition image snapshot
There is a 8 mega high definition CCD camera to snapshoot the offence vehicle. System can
overlay information such as the vehicle speed, snapshot time, snapshot position. The built-in
watermark function prevents the vicious image modification, which maximally guarantees the
authentic image.
z General management and remote maintenance function
System supports remote maintenance function. Supports the remote malfunction diagnosis,
malfunction alarm and fix remotely, which greatly reduce the maintenance work load.
z Multiple connection ways, support wireless via CDMA/GPRS/3G
System supports wire cable connection and wireless connection via CDMA/GPRS/3G at the
same time. It can be widely used in various environments.
z Extra low power consumption, support solar power
The whole system average power consumption is below 20w, completely support the solar power.
1.4 Specifications
Vehicle capture rate:95%
Measure range:(10~250)km/h
Measure accuracy: full speed range. -6km/h ~ 0.
Monitor lane: 1-6 lanes.
Operation method: 8.4 inch touch screen/web
Storage capacity:32GB SD card
Snapshot resolution:8 megapixel, 3296*2472
Video resolution:2 megapixel 1600*1200
Transmission mode: TCP/IP, FTP (Selectable)
Image format: JPEG
Image amount: 1 or 2, optional
Record mode: Image/video
IR_CUT switch: auto mode or manual mode, optional
Data interface: Two RS232 COM, one10/100M Ethernet port ,one USB2.0
port, one SD card port.
Lithium battery port: 14.8V. One 10AH lithium battery port.
Power input port: One 19V DC input port.