User Manual


42
5 Installation
5.1 Device Installation
Take the device out of the box.
Insert the Lithium battery.
Put the device on the tripod and adjust to the proper height.
Push the power button to boot up the device.
5.2 Camera Debug
Go to the Road Monitor interface.
Adjust the lens iris according to the actual environment.
Adjust the lens focus distance and definition to the proper effect.
Important
Please adjust the lens focus distance to make the middle lane clear. For example, there are
three lanes, and then you can adjust the lens to clearly snapshoot the second lane.
5.3 Radar Debug
The device shall be installed from one to three meters away of the road.
The device and the road angle shall be 22°(approach ing), 25°(departing) and 25°both).
Important
Set angle must match actual angle.
5.4 Mobile Flashlight Installation
Use the accumulator to provide power to the 12V DC flashlight
The device is 5 meters away from the flashlight. The flashlight bracket is 1.5 meters height.
Adjust the flashlight angle to get the proper image (the proper environment brightness, vivid face,
clear plate, no over exposure.)