User Manual


21
Figure 3-13
3.2.5.6 Time Setting
The time setting interface is shown as in Figure 3-14.
z Time enable: You can check the box here to enable or disable the function.
z Server IP: Please input NTP server IP address here.
z Port No.: Please input NTP server port number here. The default setup is 37.
z Sync period: It is the NTP auto synchronization period. The unit is minute and the default
setup is 7 minutes.
z Time zone: Please time zone from the dropdown list. The default setup is GMT8 Beijing,
Chongqing, Hong Kong, Urumqi.
z Time setup: You can input manually to set the system time.
Figure 3-14