User Manual


15
Figure 3-4
3.2.4 Monitor
The preview interface is shown as below. Here you can view vehicle real-time driving status.
When you are debugging the system, you can go to the following figure to view the camera effect.
See Figure 3-5.
z Bright: Please click “-” and “+” button to adjust the brightness. The value ranges from 0 to
100. The default value is 50.
z Contrast: Please click “-” and “+” button to adjust the contrast. The value ranges from 0 to
100. The default value is 50.
z Manual: Click it to snapshot current video and save it to the special storage media.
Figure 3-5