User's Manual

III
Important Safeguards and Warnings
This section introduces content covering the proper handling of the OPS module, hazard prevention,
and prevention of property damage. Read carefully before using the OPS module, and comply with
the guidelines when using it.
Transportation Requirements
Transport the OPS module under allowed humidity and temperature conditions.
Storage Requirements
Store the OPS module under allowed humidity and temperature conditions.
Operation Requirements
●
Check whether the power supply is correct before use.
●
Do not unplug the power cord on the side of the OPS module while the adapter is powered on.
●
Operate the OPS module within the rated range of power input and output.
●
Use the OPS module under allowed humidity and temperature conditions.
●
Do not drip or splash liquid onto the OPS module, make sure that there is no object filled with
liquid on the OPS module to prevent liquid from flowing into it.
●
Do not disassemble the OPS module.
●
Your configurations will be lost after performing a factory reset. Please be advised.
●
Do not restart, shut down or disconnect the power to the OPS module during an update.
●
Make sure the update file is correct because an incorrect file can result in a device error occurring.
●
Do not frequently turn on/off the OPS module. Otherwise, the product life might be shortened.
●
Back up important data on a regular basis when using the OPS module.
●
Make sure the official software is used. A counterfeit will affect the performance of your
computer.
●
The OPS module can be pre-installed with Windows operating system. Support for the operating
system (such as version updates, technical support and security features) can be obtained from
the corresponding official website.
●
Operating temperature: 0 °C to 45 °C (32 °F to 113 °F).
Installation Requirements
●
Do not connect the power adapter to the OPS module while the adapter is powered on.
●
Strictly comply with the local electric safety code and standards. Make sure the ambient voltage
is stable and meets the power supply requirements of the OPS module.
●
Do not expose the battery to environments with extremely low air pressure, or extremely high or
low temperatures. Also, it is strictly prohibited to throw the battery into a fire or furnace, and to
cut or put mechanical pressure on the battery. This is to avoid the risk of fire and explosion.