High-Performance Module Computer User's Manual V1.0.
Foreword General This manual introduces the installation, functions and operations of the high-performance module computer (hereinafter referred to as "the OPS module"). Read carefully before using the OPS module, and keep the manual safe for future reference. Safety Instruction The following signal words might appear in the manual. Signal Words Meaning Indicates a high potential hazard which, if not avoided, will result in death or serious injury.
might result in some differences appearing between the actual product and the manual. Please contact customer service for the latest program and supplementary documentation. ● There might be errors in the print or deviations in the description of the functions, operations ● ● ● ● and technical data. If there is any doubt or dispute, we reserve the right of final explanation. Upgrade the reader software or try other mainstream reader software if the manual (in PDF format) cannot be opened.
Important Safeguards and Warnings This section introduces content covering the proper handling of the OPS module, hazard prevention, and prevention of property damage. Read carefully before using the OPS module, and comply with the guidelines when using it. Transportation Requirements Transport the OPS module under allowed humidity and temperature conditions. Storage Requirements Store the OPS module under allowed humidity and temperature conditions.
● Use the standard power adapter or cabinet power supply. We will assume no responsibility for any injuries or damages caused by the use of a nonstandard power adapter. ● Do not place the OPS module in a place exposed to sunlight or near heat sources. ● Keep the OPS module away from dampness, dust, and soot. ● Install the OPS module in a well-ventilated place, and do not block its ventilation. ● Install the OPS module on a stable surface to prevent it from falling.
Table of Contents Foreword .........................................................................................................................................................................................................I Important Safeguards and Warnings ............................................................................................................................................. III 1 Overview ...........................................................................................
1 Overview 1.1 Introduction The high-performance module computer is an OPS module based on 10/11th Gen Intel Core processors. The OPS modules uses Insyde BIOS and comes with Windows 10. Developed in accordance with the OPS-C standard, it is ideal for use with large displays that support Open Pluggable Specification (OPS). 1.2 Technical Specifications The specifications are for reference only, and might differ from the actual product.
2 Appearance Figure 2-1 Front panel Table 2-1 Front panel description No. Name Description 1 Wi-Fi antenna connector Connect external Wi-Fi antennas. ● The light flashes green when the hard drive is reading or writing data. ● The light is off when the hard drive is reading or writing data, or when the OPS module is shut down. 2 HDD indicator light 3 Network port Gigabit Ethernet port. 4 USB port Connect external devices such as USB storage device, keyboard and mouse.
3 Connection You can insert the OPS module into large displays such as whiteboards. After that, the OPS module gets power, network and display signals from the large display through the OPS port. But when you use the OPS module independently, you need to connect the OPS module with a mouse, keyboard, network, and power supply. Prerequisites ● Check whether the components and accessories are complete after you unpack the OPS module.
4 System Installation The OPS modules comes preloaded with Windows 10. This section introduces how to re-install Windows system on the OPS module. The figures are for reference only, and might differ from the actual interface. Prerequisites Make sure that the OPS module is turned off and connected to a mouse, a keyboard, a monitor and network. Procedure Step 1 Step 2 Step 3 Step 4 Step 5 Insert a USB flash drive that contains the Windows installation files into the USB port of the OPS module.
Figure 3-2 Type of installation Figure 3-3 Select installation drive Step 9 Wait until the installation is complete. The system might restart several times during the process. Step 10 Select the region, and then click Yes.
Figure 3-4 Region Step 11 Select the keyboard layout, and then click Yes. You can add a second keyboard layout if needed. Step 12 Connect the network and then log in to your Microsoft account. Step 13 Set the username, password, and security questions, and then click Connect now. Step 14 Select your privacy settings, and then click Accept. Figure 3-5 Privacy settings Step 15 Follow the on-screen instructions to finish system installation.
5 FAQ Table 5-1 FAQ Issue Solution 1. Check whether the power cord is correctly connected between the power port of the OPS module and the power The system cannot work normally socket and whether the power socket is connected to the power supply. 2. Check whether the newly replaced or added firmware is correctly installed and connected. The monitor cannot work normally 1.
Appendix 1 Cybersecurity Recommendations Mandatory actions to be taken for basic device network security: 1. Use Strong Passwords Please refer to the following suggestions to set passwords: ● The length should not be less than 8 characters. ● Include at least two types of characters; character types include upper and lower case letters, numbers and symbols. ● Do not contain the account name or the account name in reverse order. ● Do not use continuous characters, such as 123, abc, etc.
the risk of ARP spoofing. 8. Assign Accounts and Privileges Reasonably According to business and management requirements, reasonably add users and assign a minimum set of permissions to them. 9. Disable Unnecessary Services and Choose Secure Modes If not needed, it is recommended to turn off some services such as SNMP, SMTP, UPnP, etc., to reduce risks.
