Dahua HD Mini IR Waterproof Fixed Network Camera Quick Start Guide Dahua HD Mini IR Waterproof Fixed Network Camera Quick Start Guide Version 1.0.0 Dahua Technology CO.
Dahua HD Mini IR Waterproof Fixed Network Camera Quick Start Guide Welcome Thank you for purchasing our Network camera! This user’s manual is designed to be a reference tool for your system. Please read the following safeguard and warnings carefully before you use this series product! Please keep this user’s manual well for future reference! Important Safeguards and Warnings 1.Electrical safety All installation and operation here should conform to your local electrical safety codes.
Dahua HD Mini IR Waterproof Fixed Network Camera Quick Start Guide Please do not touch the heat dissipation component of the device directly in order to avoid scald. Please do not dismantle the device; there is no component which can be fixed by users themselves in the machine. It may cause water leakage or bad image for the device due to unprofessional dismantling. It is recommended to use the device with thunder proof device in order to improve thunder proof effect.
Dahua HD Mini IR Waterproof Fixed Network Camera Quick Start Guide Note: Please refer to the disk for more details, check and download corresponding user’s manual and tool. Before installation, please open the package and check all the components are included. Contact your local retailer ASAP if something is broken in your package.
Dahua HD Mini IR Waterproof Fixed Network Camera Quick Start Guide Table of Contents 1 Framework ................................................................................................................................... 1 1.1 Device External Cable ................................................................................................. 1 1.2 Framework and Dimension ......................................................................................... 2 2 Device Installation ......
Dahua HD Mini IR Waterproof Fixed Network Camera Quick Start Guide 1 Framework 1.1 Device External Cable You can refer to the following figure for cable information. See Figure 1-1. Figure 1-1 Cable Figure 1-2 Cable Please refer to the following sheet for detailed information. SN 1 2 Port LAN DC 12V Port name Connector Network port Ethernet port Power input port - Function description Connect to standard Ethernet cable. Note: Some devices do not support PoE power supply. Power port.
Dahua HD Mini IR Waterproof Fixed Network Camera Quick Start Guide 1.2 Framework and Dimension The following figures are for reference only, which are used to know the device dimension, please refer to the following figures according to the actual device.
Dahua HD Mini IR Waterproof Fixed Network Camera Quick Start Guide Figure 1-5 3
Dahua HD Mini IR Waterproof Fixed Network Camera Quick Start Guide 2 Device Installation Important Please make sure the installation surface can min support the 3X weight of the camera and the bracket. Figure 2-1 Device installation 1 Please see Figure 2-1 and Figure 2-2. Step 1 Stick installation map to designated surface where you will install the device (wall or ceiling). Step 2 Dig a hole according to position of hole on installation map.
Dahua HD Mini IR Waterproof Fixed Network Camera Quick Start Guide Figure 2-2 Device installation 2 Step 6 Use cross head screw-driver (in accessories bag) to loosen adjusting screw. Step 7 Adjust the device in all possible directions, and set its monitoring direction according to the requirements. Step 8 Use cross head screw-driver to tighten the adjusting screws.
Dahua HD Mini IR Waterproof Fixed Network Camera Quick Start Guide Step 9 First rotate the bracket to one side, and then aim the end of thread of WIFI antenna in the accessories bag at the copper nut on the bottom of the back cylinder. Figure 2-4 Step 10 Then bend the antenna in the way shown in Figure 2-4, move the bracket back to the original location. Note: Step 9 and step 10 are applied to WIFI device.
Dahua HD Mini IR Waterproof Fixed Network Camera Quick Start Guide 3 Network Configuration The IP address of all the cameras is the same when leaving factory (default IP192.168.1.108), in order to make the camera get access to the network smoothly, please plan the useable IP segment reasonably according to the actual network environment. 3.
Dahua HD Mini IR Waterproof Fixed Network Camera Quick Start Guide Figure 3-1 Step 3 Modify the camera IP address on the “Net” interface, click “Save” to finish modification. See Figure 3-2 for more details.
Dahua HD Mini IR Waterproof Fixed Network Camera Quick Start Guide 3.2 Login WEB Interface Note: Different devices may have different WEB interfaces, the figures below are just for reference, please refer to the document <> in the disk and the actual interface for more details Step 1 Open IE and input the modified camera IP address in the address bar.
Dahua HD Mini IR Waterproof Fixed Network Camera Quick Start Guide Figure 3-4 Note: This quick start guide is for reference only. Slight difference may be found in user interface. All the designs and software here are subject to change without prior written notice. If there is any uncertainty or controversy, please refer to the final explanation of us. Please visit our website or contact your local service engineer for more information. Dahua Technology Co., Ltd Address:No.
) * )+ ",, ! - ' . #)$ / # $" , # $ 0 . 1- (. , * )+ ",, ! 2 .