User's Manual
9
Note:
When you need to reset the device, press the “Reset” button in Figure 3-2 for 10 seconds while
connecting device to power.
When you need to use WPS function, press the “Reset” button in Figure 3-2 for 1 to 2 seconds while
connecting device to power, then press WPS button on the router. Generally the device can be
connected to corresponding router within 1 minute (supported by some series products).
Step 6
Take dome enclosure, put it back on the camera properly regarding to screw and hole, and fasten the
three inner hex screws with wrench.