User's Manual

6
4 Basic Operations
Connect a mouse or use a remote control to operate the box. This chapter uses connecting a mouse
for device operations as the example.
4.1 Starting and Shutting Down
●
Before you start the box, check whether the input voltage matches the rated voltage of the box.
●
To ensure stable operation and long service life of the box and external devices connected to the
box, follow national standards and provide a power supply with stable voltage and low ripple
interference.
Starting the box
Plug in the power cord, and then turn on the switch. The box starts.
Shutting down the box
Turn off the switch and then unplug the power cord. The box shuts down.
4.2 Initialization
When you log in for the first time or after you restore the factory settings, you need to initialize the
box. After that, you can configure and operate the box.
Step 1 Power on the box.
Step 2 Select the language, and then click Save and Next.
Step 3 Read the software license agreement, and then click Next.
Step 4 Enter and confirm the password, and then click OK.
Figure 4-1 Enter password