Users Manual

256

5.11.2.2 Port

The connection interface is shown as in Figure 5-34.

Figure 5-34

Please refer to the following sheet for detailed information.

Parameter Function

Max connection

The max client login amount (such as WEB, platform, cellphone

and etc). The value ranges from 1 to 128(default).

TCP port

The default value is 37777. You can input the actual port

number if necessary.

UDP port

The default value is 37778. You can input the actual port

number if necessary.

HTTP port

The default value is 80. You can input the actual port number if

necessary.

HTTPS

Select the Enable check box and configure the port according to

your actual needs. The default value is 443. After HTTPS is

enabled, HTTP will be switched to HTTPS by force to transmi

data in a safer way.

RTSP port The default value is 554.

5.11.2.3 Wi-Fi AP

This function is available only for NVR devices with built-in Wi-Fi module. See the actual situation.

5.11.2.3.1 General Setup

The Wi-Fi AP interface is shown as in Figure 5-35. Select the Enable check box and you can set Wi-Fi

hotspot including SSID, encryption type, password, channel and gain, so that the Wi-Fi IPC can use the

hotspot to connect to the network.