User's Manual

68
4.3 Preview
After device booted up, the system is in multiple-channel display mode. See Figure 4-55.Please note the
displayed window amount may vary. The following figure is for reference only. Please refer to chapter 1.3
Specifications for the window-amount your product supported.
Figure 4-55
4.3.1 Preview
If you want to change system date and time, you can refer to general settings (Main
Menu->Setting->System->General). If you want to modify the channel name, please refer to the
display settings (Main Menu->Camera->CAM name)
Please refer to the following sheet for detailed information.
SN Icon Function
1 When current channel is recording, system displays this icon.
2 When motion detection alarm occurs, system displays this icon.
3 When video loss alarm occurs, system displays this icon.
4
When current channel is in monitor lock status, system displays this
icon.
5
When the device remotely connects Wi-Fi IPC, this icon is displayed
on the screen of the corresponding channel.
Only some devices support this function.
Tips
 Preview drag: If you want to change position of channel 1 and channel 2 when you are
previewing, you can left click mouse in the channel 1 and then drag to channel 2, release mouse
you can switch channel 1 and channel 2 positions.
 Use mouse middle button to control window split: You can use mouse middle button to switch
window split amount.