User's Manual

51
Figure 4-36
4.2 Camera
4.2.1 Connection
After register a remote device to the NVR, you can view the video on the NVR, and manage and storage
the video file. Different series products support different remote device amount.
4.2.1.1 Change IP address
Step 1 From Main menu->Setting->Camera->Registration, check the box before the camera name and
then click Change IP or click the before the camera name.
Enter change IP interface. See Figure 4-37.
Note
Check the box before several cameras, change the IP addresses of several cameras at the
same time.
Figure 4-37
Step 2 Select IP mode.
Check DHCP, there is no need to input IP address, subnet mask, and default gateway. Device
automatically allocates the IP address to the camera.
Check Static, and then input IP address, subnet mask, default gateway and incremental value.