User's Manual

45
connection fails. The value ranges from 0s～43200s. After the network connection resumed,
the system can get the video from the SD card and there is no risk of record loss.
 Period setup: Click button after one date or a holiday, you can see an interface shown
as in Figure 4-26.There are five record types: regular, motion detection (MD), Alarm, MD &
alarm and IVS.
Figure 4-26
Please following the steps listed below to draw the period manually.
Step 1 Select a channel you want to set. See Figure 4-27.
Figure 4-27
Step 2 Set record type. See Figure 4-28.
Figure 4-28
Note
 When the record type is MD (motion detect), alarm, MD&Alarm, IVS and POS, please enable
the channel record function when corresponding alarm occurs. For example, when the alarm
type is MD, from main menu->Setting->Event->Video Detect->Motion Detect, please select
the record channel and enable record function. See Figure 4-29.
 When the record type is MD (motion detect), alarm, MD&Alarm, IVS and POS, refer to
chapter 4.7.1 Video detect, chapter 4.7.9 Alarm Settings, chapter 4.7.3 IVS and chapter
4.7.12 POS.