User's Manual

39
Figure 4-21
Step 2 Configure the parameters. For details, see following table.
Parameter Function
IP Address
Input the IP address, subnet mask and default gateway of the NVR Wi-Fi AP.
The IP address and default gateway shall be in the same network segment.
Subnet Mask
Default
Gateway
Start IP/End
IP
Input start IP and end IP of DHCP server. The NVR device can allocate the IP
address in the range you specified here.
Upgrade
Click it to upgrade Wi-Fi AP module.
4.1.4.5 Registration
After add remote device, the device can receive, storage, and manage the video streams of the remote
device. You can view, browse, playback, manage several remote devices at the same time.
Step 1 On the P2P interface, click Next button.
Enter remote device interface. See Figure 4-22.
Note
There are two ways to go to Registration interface.
 From main menu->Setting->Camera->Registration, you can go to the registration interface.
 On the preview interface, right click mouse and then select Camera Registration.