User's Manual

Figure 4-20

Step 2 Select the 2.4GHz check box and configure the parameters. For details, see following table.

Parameter

Function

2.4GHz Select the check box to enable Wi-Fi.

SSID Enter the SSID name. You can use this name to search the device.

Encryption

Type

Select the encryption type from the dropdown list, including WPA2 PSK, WPA

PSK and OPEN.

Password

Enter the SSID password. You can use this password to connect to the

network.

Channel Select the channel to connect the Wi-Fi IPC.

Gain Adjust the Wi-Fi signal intensity.

4.1.4.4.2 Advanced Settings

This function is available only for NVR devices with built-in Wi-Fi module. See the actual situation.

You can configure the Wi-Fi IP address, subnet mask, default gateway and DHCP derver here.

Step 1 From main menu > Setting > Network > Wi-Fi AP > Advanced.

The Advanced interface is displayed. See Figure 4-21.