User's Manual

3.4.2 NVR41H/41H-P/41H-8P/21HS-S2/21HS-P-S2/21HS-8P-S2/41HS-W-S2/41HS-4KS

2/41HS-P-4KS2/41HS-8P-4KS2/21HS-4KS2/21HS-P-4KS2/21HS-8P-4KS2/21HS-

W-4KS2 Series

①

Loosen the screws of the upper

cover and side panel.

②

Connect the one end of the

HDD data cable and the

power cable to the

mainboard.

③

Connect the other end of the

HDD data cable and the

power cable to the HDD.

④

Place the HDD in accordance

with the four holes on the

bottom of the chassis.

⑤

Turn the device upside down;

fix the screws to secure the

HDD on the bottom of the

chassis.

⑥

Put the cover in accordance

with the clip and then fix the

screws on the rear panel

and side panel.

3.5 Connection Sample

3.5.1 NVR41HS-W-S2/21-W-4KS2/21HS-W-4KS2 Series

Please refer to Figure 3-1 for connection sample.

The following figure for reference only.