Product Info

164
The connection setup interface is shown as in Figure 4-165.
 Max connection: The max client login amount (such as WEB, platform, cellphone and etc). The value
ranges from 1 to 128(default).
 TCP port: Default value is 37777.
 UDP port: Default value is 37778.
 HTTP port: Default value is 80.
 HTTPS port: Select the Enable check box and configure the port according to your actual needs. The
default value is 443. After HTTPS is enabled, HTTP will be switched to HTTPS by force to transmit
data in a safer way.
 RTSP port: Default value is 554.
System needs to reboot after you changed and saved any setup of the above ports. Make sure the port
values here do not conflict.
Figure 4-165
4.8.1.3
Wi-Fi AP
Note
This function is available only for NVR devices with built-in Wi-Fi module. See the actual situation.
4.8.1.3.1 General Settings
The Wi-Fi AP interface is shown as below. See Figure 4-166. Here you can set Wi-Fi hotspot, so that the
network camera can use the hotspot to connect to the network.
 2.4GHz: Please check the box to enable the function.
 SSID: It is to set SSID name. You can use this name to search the device.
 Password: It is to set SSID password. You can use this password to connect to the network.