Config Guide

332
Figure 5-148
5.11.5.12 Upgrade
CAUTION
 During the upgrade process, do not unplug the power cable, network cable, or shutdown the device.
 Improper upgrade program may result in device malfunction!
There are two upgrade modes: file upgrade and online upgrade.
5.11.5.12.1
File Upgrade
The upgrade interface is shown as in Figure 5-149.
Please select the upgrade file and then click the update button to begin update. Please note the file name
shall be as *.bin.
Figure 5-149
5.11.5.12.2 Cloud Upgrade
When the NVR is online, you can use the cloud upgrade to update the firmware.
Note
Make sure the NVR has properly connected to the network.
Version Detection
The version detection includes auto detection and manual detection. It displays current system version
and application released date.
 Enable auto detection, NVR interacts with the cloud every day to detect if there is a new version
available. When there is a new version, system marks a red point on the Upgrade tab.
Note
To inform you upgrading firmware timely, we will collect your device information such as IP address,